C_TFIN52_66日本語勉強の資料、VCP5-DCV日本語認定資格、C_TSCM62_65日本語問題集

http://www.japancert.com/C_TFIN52_66-JP.html

I10-003学習資料、I10-001勉強の資料、I10-002資格問題集

JapanCertのI10-003問題集はあなたが信じられないほどの的中率を持っています。この問題集は実際試験に出る可能性があるすべての問題を含んでいます。したがって、この問題集をまじめに勉強する限り、試験に合格することが朝飯前のことになることができます。XML Master試験の重要なの一環として、I10-003認定試験はあなたに大きな恩恵を与えることができます。ですから、あなたを楽に試験に合格させる機会を逃してはいけません。JapanCertは試験に失敗した場合は全額返金を約束しますから、I10-003試験に合格することができるように、はやくJapanCertのウェブサイトに行ってもっと詳細な情報を読んでください。

JapanCertは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。

JapanCertのXML MasterのI10-002試験トレーニング資料は必要とするすべての人に成功をもたらすことができます。XML MasterのI10-002試験は挑戦がある認定試験です。現在、書籍の以外にインターネットは知識の宝庫として見られています。JapanCert で、あなたにあなたの宝庫を見つけられます。JapanCert はXML MasterのI10-002試験に関連する知識が全部含まれていますから、あなたにとって難しい問題を全て解決して差し上げます。

I10-001認定試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。それはJapanCertのI10-001問題集を利用することです。

I10-003試験番号:I10-003 受験記対策
試験科目:「XML Master Professional Database Administrator」
最近更新時間:2014-07-23
問題と解答:39

>>詳しい紹介はこちら

 
I10-001試験番号:I10-001 練習問題
試験科目:「XML Master Basic V2」
最近更新時間:2014-07-23
問題と解答:129

>>詳しい紹介はこちら

 
I10-002試験番号:I10-002 資格問題集
試験科目:「XML Master: Professional V2」
最近更新時間:2014-07-23
問題と解答:80

>>詳しい紹介はこちら

 

JapanCertは最高な品質で最速なスピードでXML MasterのI10-002認定試験の資料を更新するサイトでございます。もしかすると君はほかのサイトもXML MasterのI10-002認証試験に関する資料があるのを見つけた、比較したらJapanCertが提供したのがいちばん全面的で品質が最高なことがわかりました。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/I10-002.html

NO.1 Select which of the following correctly describes WSDL. (WSDL 1.1)
A. WSDL assumes SOAP as the message transmission form
B. When WSDL is defined by a combination of style="rpc" and use="encoded", then
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" must be designated
C. When WSDL is defined by a combination of style="rpc" and use="encoded", then the encodingStyle
attribute cannot be designated
D. WSDL may be defined by a combination of style="rpc" and use="literal"
Answer: D

XML Master関節   I10-002   I10-002勉強法   I10-002過去

NO.2 Which of the following describes the most correct call order of the ContentHandler interface methods
when parsing the following "XML Document" using a non-validating SAX parser? This question reflects
line feeds within the XML document.
[XML Document]
<a>
<b>
c
</b>
</a>
A. startDocument - startElement - characters - startElement - characters - characters - characters -
endElement - characters - endElement - endDocument
B. startDocument - startElement - ignorableWhitespace - startElement - ignorableWhitespace -
characters - ignorableWhitespace - endElement - ignorableWhitespace - endElement - endDocument
C. startDocument - startElement - startElement - characters - endElement - endElement - endDocument
D. startDocument - startElement - startElement - characters - characters - endElement - endElement -
endDocumentW
Answer: A

XML Master   I10-002   I10-002   I10-002攻略   I10-002認定

NO.3 What must you write in XSLT style sheet (1) to process the following "XML Document" and obtain the
following "transform results"? Select the correct answer below. Note that "#" indicates a line feed, and "=*"
indicates a tab.
Assume that the XSLT processor can output transformation results as a document.
A. Nothing needs to be written.
B. <xml:space="preserve"/>
C. <xsl:preserve-space elements="content"/>
D. <xsl:strip-space elements="doc body"/>
Answer: D

XML Master問題   I10-002参考書   I10-002教科書   I10-002クラムメディア

NO.4 Push the Exhibit Button to load the referenced "XML Document 1" and "XML Document 2," and process
XML using "DOM Processing."
Select which of the following is the most appropriate expression of the results under XML 1.0. Line feeds
and/or indents are not reflected in the results.
A. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " >string value</data>
</root2>
B. <root2 xmlns="urn:xmlmaster:EX2">
<data>string value</data>
</root2>
C. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " />
</root2>
D. <root2 xmlns="urn:xmlmaster:EX2">
<data/>
</root2>
Answer: A

XML Master認証試験   I10-002会場   I10-002一発合格   I10-002認定資格   I10-002一発合格

NO.5 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<TestML xmlns="urn:xmlmaster:testml">
<record level="1" data="100" />
<record level="2" data="250" />
</TestML>
Choose the XML Schema Document that does not correctly define the structure of the "XML Document".
A. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" tns:testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" tns:record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" tns:recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
B. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
C. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
D. <schema
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml">
<element name="TestML" type="tns:testmlType" />
<complexType name="testmlType">
<sequence>
<element ref="tns:record" maxOccurs="unbounded" />
</sequence>
</complexType>
<element name="record" type="tns:recordType" />
<complexType name="recordType">
<attribute name="level" type="int" />
<attribute name="data" type="int" />
</complexType>
</schema>
Answer: C

XML Master科目   I10-002特典   I10-002書籍   I10-002

NO.6 Push the Exhibit Button to load the referenced "XML Document".
Assume that the character "3" is obtained from the "XML document". Select which XSLT style sheet
correctly performs the transformation. (Multiple answers possible. Select two.)
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[x='1'][y='2'] " />
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[(attribute::x='1') and (text()='3')] " />
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self='3'] " />
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self::*='3'] " />
</xsl:template>
</xsl:stylesheet>
Answer: BD

XML Masterフリーク   I10-002 vue   I10-002   I10-002   I10-002模擬   I10-002関節

NO.7 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<root><data>lmnop</data></root>
Assume that the "XML document" is changed to the "Results XML Document." Select which XSLT style
sheet correctly performs the transformation.
Note that the XSLT processor can output transformation results as a document.
[Results XML Document]
<lmnop/>
Or
<lmnop></lmnop>
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="<xsl:value-of select='.'/>"/>
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="{ . }"/>
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="."/>
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:text disable-output-escaping="no"><</xsl:text>
<xsl:value-of select="."/>
<xsl:text disable-output-escaping="no">/></xsl:text>
</xsl:template>
</xsl:stylesheet>
Answer: B

XML Master内容   I10-002過去問   I10-002問題集   I10-002取得   I10-002認定試験

NO.8 Which of the following correctly describes the DOM (Level 2) Node interface?
A. The Node interface can be used to change the value (nodeValue) of the DOM element node (Element)
B. The Node interface can be used to change the name (nodeName) of the DOM element node (Element)
C. The Node interface can be used to change the value (nodeValue) of the DOM attribute node (Attr)
D. The Node interface can be used to change the name (nodeName) of the DOM attribute node (Attr)
Answer: C

XML Master教育   I10-002赤本   I10-002   I10-002

投稿日: 2014/7/24 18:32:39  |  カテゴリー: XML Master  |  タグ: I10-003I10-001模擬I10-002赤本XML Master