あなたに最大の利便性を与えるために、JapanCertは様々なバージョンの教材を用意しておきます。PDF版の70-513問題集は読みやすくて、忠実に試験の問題を再現することができます。テストエンジンとして、ソフトウェア版の70-513問題集はあなたの試験の準備についての進捗状況をテストするために利用することができます。もし試験の準備を十分にしたかどうかを確認したいなら、ソフトウェア版の70-513問題集を利用して自分のレベルをテストしてください。従って、すぐに自分の弱点や欠点を識別することができ、正しく次の70-513学習内容を手配することもできます。
70-246認定試験の準備をするために、JapanCert の専門家たちは彼らの豊富な知識と実践を生かして特別なトレーニング資料を研究しました。JapanCert のMicrosoftの70-246問題集はあなたが楽に試験に受かることを助けます。JapanCert のMicrosoftの70-246練習テストは70-246試験問題と解答、 70-246 問題集、70-246 書籍や70-246勉強ガイドに含まれています。
君はほかのサイトや書籍もブラウズ するがもしれませんが、弊社の関連の学習資料と比較してからJapanCertの商品の範囲が広くてまたネット上でダウンロードを発見してしまいました。JapanCertだけ全面と高品質の問題集があるのではJapanCertの専門家チームが彼らの長年のIT知識と豊富な経験で研究してしました。そして、JapanCertに多くの受験生の歓迎されます。
難しい70-246認定試験に合格したいなら、試験の準備をするときに関連する参考書を使わないとダメです。自分に合っている優秀な参考資料がほしいとしたら、一番来るべき場所はJapanCertです。JapanCertの知名度が高くて、IT認定試験に関連するいろいろな優秀な問題集を持っています。それに、すべての70-246試験問題集に対する無料なdemoがあります。JapanCertの70-246問題集があなたに適するかどうかを確認したいなら、まず問題集のデモをダウンロードして体験してください。
試験番号：70-513 復習問題集試験科目：「TS: Windows Communication Foundation velopment with Microsoft .NET Framework 4」
最近更新時間：2014-05-02
問題と解答：163
試験番号：70-246 試験過去問試験科目：「Monitoring and Operating a Private Cloud with System Center 2012」
最近更新時間：2014-05-02
問題と解答：116
JapanCertの70-246 問題集はあなたが70-246認定試験に準備するときに最も欠かせない資料です。この問題集の価値は試験に関連する他の参考書の総合の価値に相当します。このアサーションは過言ではありません。JapanCertの問題集を利用してからこのすべてが真であることがわかります。
あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。JapanCert Microsoftの070-483日本語試験問題集はあなたが自分の目標を達成することを助けられます。JapanCert Microsoftの070-483日本語問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。
JapanCertのMicrosoftの070-483日本語トレーニング資料を利用したら、初めて試験を受けるあなたでも一回で試験に合格できることを保証します。JapanCertのMicrosoftの070-483日本語トレーニング資料を利用しても合格しないのなら、我々は全額で返金することができます。あなたに他の同じ値段の製品を無料に送って差し上げます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/70-513.html
NO.1 A class named TestService implements the following interface:
[ServiceContract]
public interface ITestService
{
[OperationContract]
DateTime GetServiceTime();
}
TestService is hosted in an ASP.NET application.
You need to modify the application to allow the GetServiceTime method to return the data formatted as
JSON.
It must do this only when the request URL ends in /ServiceTime. What should you do?
A.Add this attribute to the GetServiceTime method.
[WebInvoke(Method="POST")]
In the web.config file, add this element to system.serviceModel/behaviors/endpointBehaviors.
<behavior name="Json">
<enableWebScript />
</behavior>
In the web.config file, configure TestService in the system.serviceModel/services collection as follows:
<service name="TestService">
<endpoint address="/ServiceTime"
contract="TestService"
behaviorConfiguration="Json"
binding="webHttpBinding" />
</service>
B.Add this attribute to the GetServiceTime method.
[WebInvoke(Method="GET", UriTemplate="/ServiceTime", ResponseFormat=WebMessageFormat.Json)]
In the web.config file, configure TestService in the system.serviceModel/services collection as follows:
<service name="TestService">
<endpoint address="/ServiceTime"
contract="TestService"
binding="webHttpBinding"/>
</service>
C.Add this attribute to the GetServiceTime method
[WebGet(ResponseFormat=WebMessageFormat.Json, UriTemplate="/ServiceTime")]
Create a new svc file named Jsonversion.svc with the following content.
<% @ServiceHost Service="TestService"
Factory="System.ServiceModel.ActivationWebServiceHostFactory" %>
D.Add this attribute to the GetServiceTime method.
[WebGet(UriTemplate="Json)/ServiceTime")]
Create a new .svc file named Jsonversion.svc with the following content
<% @ServiceHost Service="TestService"
Factory="System.ServiceModel.ActivationWebServiceHostFactory" %>
Answer: C
Microsoft 教育 70-513 練習 70-513 認定資格
NO.2 You are creating a Windows Communication Foundation (WCF) service. You do not want to expose the
internal implementation at the service layer.
You need to expose the following class as a service named Arithmetic with an operation named Sum:
public class Calculator
{
public int Add(int x, int y)
{
}
}
Which code segment should you use?
A.[ServiceContract(Namespace="Arithmetic")]
public class Calculator
{
[Operation Contract(Action="Sum")]
public int Add(int x, int y)
{}
}
B.[ServiceContract(ConfigurationName="Arithmetic")]
public class Calculator
{
[Operation Contract(Action="Sum")]
public int Add(int x, int y)
{}
}
C.[ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(Name="Sum")]
public int Add(int x, int y)
{}
}
D.[ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(ReplyAction="Sum")]
public int Add(int x, int y)
{}
}
Answer: C
Microsoft 特典 70-513 内容 70-513 合格点
NO.3 host.Description.Behaviors.Add(new RoutingBehavior(rc));
Request-reply operations are failing. You need to ensure that the router can handle one-way and
request-reply operations.
What should you do?
A.Change line 03 as follows:
typeof(IRequestReplyRouter),
B.Change line 03 as follows:
typeof(IDuplexSessionRouter),
C.Change line 10 as follows:
typeof(IRequestReplyRouter)
D.Change line 10 as follows:
typeof(IDuplexSessionRouter)
Answer: B
Microsoft 教本 70-513 虎の巻 70-513 70-513 関節 70-513 PDF
12.You are modifying an existing Windows Communication Foundation (WCF) service that is defined as
follows:
[ServiceContract]
public interface IMessageProcessor
{
[OperationContract]
void ProcessMessages();
}
public class MessageProcessor: IMessageProcessor
{
public void ProcessMessage();
SubmitOrder();
}
SubmitOrder makes a call to another service. The ProcessMessage method does not perform as
expected under a heavy load.
You need to enable processing of multiple messages. New messages must only be processed when the
ProcessMessage method is not processing requests,
or when it is waiting for calls to SubmitOrder to return.
Which attribute should you apply to the MessageProcessor class?
A.CallbackBehavior(ConcurrencyMode=ConcurencyMode.Reentrant)
B.CallbackBehavior(ConcurrencyMode=ConcurrencyMode.Multiple)
C.ServiceBehavior(ConcurrencyMode=ConcurrencyMode.Reentrant)
D.ServiceBehavior(ConcurrencyMode=ConcurrencyMode.Multiple)
Answer: C
Microsoft 科目 70-513 70-513 70-513 入門 70-513 入門
13.A Windows Communication Foundation (WCF) service listens for messages at
net.tcp://www.contoso.com/MyService.
It has a logical address at http://www.contoso.com/MyService. The configuration for the WCF client is as
follows:
<endpoint address="http://www.contoso.com/MyService"
binding="netTcpBinding"
bindingConfiguraton="NetTcpBinding_IMyService"
contract="ServiceReference1.IMyService"
name="NetTcpBinding_IMyService"/>
The generated configuration does not provide enough information for the client to communicate with the
server.
You need to update the client so that it can communicate with the server. What should you do?
A.In the client configuration, change the value of the address attribute to
net.tcp://www.contoso.com/MyService
B.In the client configuration, change the value of the address attribute to
net.tcp://www.contoso.com/MyService listen=http://www.contoso.com/MyService.
C.After instantiating the client and before invoking any service operation, add this line of code.
EndpointBehaviors.Add(new EndpointDiscoveryBehavior(){ Enabled = true });
D.After instantiating the client and before invoking any service operation, add this line of code.
client.Endpoint.Behaviors.Add(new ClientViaBehavior(new
Uri("net.tcp://www.contoso.com/IMyService")));
Answer: D
Microsoft 対策 70-513 教科書 70-513 番号 70-513 学校 70-513 テスト
14.A Windows Communication Foundation (WCF) service is self-hosted in a console application.
The service implements the IDataAccess contract, which is defined in the MyApplication namespace.
The service is implemented in a class named DataAccessService which implements the IDataAccess
interface and also is defined in the MyApplication namespace. The hosting code is as follows.
(Line numbers are included for reference only.)
01 static void Main(string[] args)
02 {
03 ServiceHost host;
04 ...
05 host.Open();
06 Console.ReadLine();
07 host.Close();
08 }
You need to create a ServiceHost instance and assign it to the host variable. You also need to instantiate
the service host.
Which line of code should you insert at line 04?
A.host = new ServiceHost("MyApplication.DataAccessService");
B.host = new ServiceHost("MyApplication.DataAccess");
C.host = new ServiceHost(typeof(IDataAccess));
D.host = new ServiceHost(typeof(DataAccessService));
Answer: D
Microsoft 練習問題 70-513 ふりーく 70-513 フリーク 70-513 一発合格 70-513
15.A Windows Communication Foundation (WCF) service implements the following contract.
[ServiceContract]
public interface IHelloService
{
[OperationContract(WebGet(UriTemplate="hello?name={name}"))]
string SayHello(string name);
}
The implementation is as follows:
public class HelloService: IHelloService
{
public string SayHello(string name)
{
return "Hello " + name;
}
}
The service is self-hosted, and the hosting code is as follows:
WebServiceHost svcHost = CreateHost();
svcHost.Open();
Console.ReadLine();
svcHost.Close();
You need to implement CreateHost so that the service has a single endpoint hosted at
http://localhost:8000/HelloService.
Which code segment should you use?
A.WebServiceHost svcHost = new WebServiceHost(typeof(HelloService));
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"http://localhost:8000/HelloService");
return svcHost;
B.Uri baseAddress = new Uri("http://localhost:8000");
WebServiceHost svcHost = new WebServiceHost(typeof(HelloService), baseAddress);
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"HelloService");
return svcHost;
C.WebServiceHost svcHost = new WebServiceHost(new HelloService());
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"http://localhost:8000/HelloService");
retumn svcHost
D.Uri baseAddress = new Uri("http://localhost:8000/");
WebServiceHost svcHost = new WebServiceHost(new HelloService(), baseAddress);
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"HelloService");
retumn svcHost;
Answer: B
Microsoft ガイド 70-513 試験 70-513 通信 70-513 試験 70-513 学校 70-513 問題集
16.You are building a client for a Windows Communication Foundation (WCF) service.
You need to create a proxy to consume this service. Which class should you use?
A.ChannelFactory<TChannel>
B.ServiceHost
C.ClientRuntime
D.CommunicationObject
Answer: A
Microsoft 70-513 短期 70-513 受験記 70-513 模擬
17.You are working with a Windows Communication Foundation (WCF) client application that has a
generated proxy named SampleServiceProxy.
When the client application is executing, in line 04 of the following code, the channel faults (Line numbers
are included for reference only.)
01 SampleServiceProxy proxy = new SampleServiceProxy();
02 try
03 {
04 proxy.ProcessInvoice(invoice);
05 }
06 catch
07 {
08 if(proxy.State == CommunicationState.Faulted)
09 {
10 ...
11 }
12 }
13 proxy.UpdateCustomer(customer);
You need to return proxy to a state in which it can successfully execute the call in line 13.
Which code segment should you use at line 10?
A.proxy.Close();
B.proxy = new SampleServiceProxy();
C.proxy.Abort();
D.proxy.Open();
Answer: B
Microsoft 認定資格 70-513 70-513
18.A Windows Communication Foundation (WCF) service has a callback contract. You are developing a
client application that will call this service.
You must ensure that the client application can interact with the WCF service. What should you do?
A.On the OperationContractAttribute, set the AsyncPattern property value to true.
B.On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the
client.
C.On the client, create a proxy derived from DuplexClientBase<TChannel>.
D.On the client, use GetCallbackChannel<T>.
Answer: C
Microsoft 70-513 日記 70-513 会場
NO.4 A Windows Communication Foundation (WCF) application uses a data contract that has several data
members.
You need the application to throw a SerializationException if any of the data members are not present
when a serialized instance of the data contract is deserialized.
What should you do?
A.Add the KnownType attribute to the data contract.
Set a default value in each of the data member declarations.
B.Add the KnownType attribute to the data contract.
Set the Order property of each data member to unique integer value.
C.Set the EmitDefaultValue property of each data member to false.
D.Set the lsRequired property of each data member to true.
Answer: D
Microsoft 資格 70-513 体験 70-513 合格点 70-513 認証試験 70-513 日記
NO.5 You are developing a client that sends several types of SOAP messages to a Windows Communication
Foundation (WCF)
service method named PostData. PostData is currently defined as follows:
[OperationContract]
void PostData(Order data);
You need to modify PostData so that it can receive any SOAP message. Which code segment should
you use?
A.[OperationContract(IsOneWay=true, Action="*", ReplyAction="*")]
void PostData(Order data);
B.[OperationContract(IsOneWay=true, Action="*", ReplyAction = "*")]
void PostData(BodyWriter data);
C.[OperationContract]
void PostData(BodyWriter data);
D.[OperationContract]
void PostData(Message data);
Answer: D
Microsoft 試験 70-513 認証試験 70-513 攻略 70-513 費用 70-513 虎の巻
NO.6 The following is an example of a SOAP envelope.
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope">
<s:Header>
<h:StoreId xmlns:h="http://www.contoso.com">6495</h:StoreId>
</s:Header>
<s:Body>
<CheckStockRequest xmlns="http://www.contoso.com">
<ItemId>2469<ItemId>
</CheckStockRequest>
</s: Body>
</s:Envelope>
You need to create a message contract that generates the SOAP envelope.
Which code segment should you use?
A.[MessageContract(WrapperName="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember(Namespace="http://www.contoso.com")]
public int ItemId { get; set; }
}
B.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember(Namespace="http://www contoso.com")]
public int ItemId { get; set; }
}
C.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
public int ItemId { get; set; }
}
D.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember]
public int ItemId { get; set; }
}
Answer: D
Microsoft 特典 70-513 日記 70-513 70-513 教材
NO.7 RoutingConfiguration rc = new RoutingConfiguration();
NO.8 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 [ServiceContract]
02 [ServiceBehavior(IncludeExceptionDetailsInFaults = true)]
03 public class OrderService
04 {
05 [OperationContract]
06 public void SubmitOrder(Order anOrder)
07 {
08 try
09 {
10 ...
11 }
12 catch(DivideByZeroException ex)
13 {
14 ...
15 }
16 }
17 }
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A.Replace line 14 with the following line:
throw;
B.Replace line 14 with the following line:
throw new FaultException<Order>(anOrder, ex.ToString());
C.After line 05, add the following line:
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line:
throw ex;
D.Alter line 05, add the following line:
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line:
throw new FaultException<Order>(anOrder, "Divide by zero exception");
Answer: D
Microsoft 一発合格 70-513 70-513 赤本
