試験科目:「Certified Wireless Technology Specialist - Sales」

>> PW0-071資格取得

試験科目:「Certified Wireless Security Professional (CWSP)」

>> CWSP-205問題と解答

試験科目:「Certified Wireless Design Professional」

>> CWDP-302資格試験


JapanCertあなたに 最高のCWNPのCWDP-302資格試験を提供して差し上げます。あなたを成功への道に引率します。JapanCertのCWNPのCWDP-302資格試験トレーニング資料は試験の準備をしているあなたにヘルプを与えます。当社の資料はあなたがIT専門家になるように特別に受験生の皆さんのために作成したものです。JapanCertのCWNPのCWDP-302資格試験トレーニング資料はあなたに最も適用して、あなたのニーズを満たす資料です。はやくJapanCertのサイトを登録してくだい。きっと棚ぼたがありますよ。


NO.1 You are creating an outdoor bridge link that spans more than 1000 yards. Which one of the
following antenna types is more likely to be included in the design?
A. Yagi
B. Omni
C. Patch
D. Panel
Answer: A

CWNPウェブトレーニング   CWDP-302受験資格   CWDP-302過去問題   CWDP-302教材

NO.2 In this question, you will compare the mobility processes of a network that supports
WPA2Personal and WPA2-Enterprise. Assume the use of a 15-character ASCII passphrase for
WPA2Personal and EAP-TTLS/MSCHAPv2 with WPA2-Enterprise. Also, assume that proprietary
roaming protocols are not supported.
When a device transitions from one BSS to another within the same ESS, what step must be
performed in the WPA2-Enterprise transition that are not performed in the WPA2-Personal
A. Open System Authentication
B. 802.11 Reassociation
C. 802.1X authentication
D. 4-Way Handshake
Answer: C

CWNP過去問題   CWDP-302スキル   CWDP-302知識

NO.3 Given: In a site survey deliverable report, you are expected to explain the spectrum
measurements taken at the customer's site. What portion of a spectrum analyzer view can be used to
determine if a given channel is too active for use as the active channel for a new AP?
A. Device list
B. Frame decode
C. Real time FFT
D. Duty cycle
Answer: D

CWNP認証   CWDP-302虎の巻   CWDP-302認定資格試験

NO.4 When performing an indoor predictive site survey to make the WLAN planning and design cycle
more efficient, what is a best practice for configuration of the simulated APs in the predictive
modeling software?
A. All simulated APs should be set to 20 MHz channels only.
B. Always use the default 2.2 dBi omnidirectional antenna patterns for simulated APs.
C. If dynamic RRM will be used, AP transmit power should be set to an estimated average level of the
expected client devices, such as 25 mW.
D. Defining custom AP and antenna patterns will yield more accurate prediction data than the
preconfiguredvendor AP/antenna combinations.
Answer: C

CWNP模試エンジン   CWDP-302勉強ガイド

NO.5 As you plan a WLAN upgrade, you have assessed the network requirements and data signatures
of your applications.
One of the popular applications used on your network requires high bandwidth and low to medium
Wi-Fi loss, but can tolerate moderate latency and jitter.
What application matches this description?
A. Voice
B. Email
C. Skype chat
D. Video-on-demand
Answer: D

CWNPオンライン版   CWDP-302試験問題

NO.6 As an implementation engineer, you have just received initial design specs from a network
designer for your dual-band 802.11n deployment. The network design documents prescribe the
following data rate configuration for the 2.4 GHz radio: Basic Rates - 5.5, 6, 11, 12 Mbps
Supported Rates -9, 18, 24, 36, 48, and 54 Mbps as well as MCS 0-15
What will result from this design strategy?
A. By disabling support for 1 and 2 Mbps while allowing 5.5 and 11 Mbps, the network will force
802.11b clients to use these higher data rates.
B. Protection mechanisms will always be in use on this network to support 5.5 and 11 Mbps as basic
C. HR/DSSS (802.11b) stations will not be able to associate to the service set.
D. This configuration violates the IEEE specification that defines 6, 12, and 24 Mbps as mandatory
data rates for 802.11g/n.
Answer: C

CWNP無料模擬試験   CWDP-302学校   CWDP-302問題と解答

Related Links: http://pw0-071-pdf-exam20.jpcertify.com
投稿日: 2015/12/23 22:13:44  |  カテゴリー: CWNP  |  タグ: PW0-071勉強時間CWSP-205受験料過去問CWDP-302ブロンズ教材CWNP